Site gateway
On a pole at the gate.
Mains power and a clear view of the gate or the wash bay.
Hardware
Build the setup for your fleet.
See what you can tag and how the pieces fit. Then build your own kit, see the Hirro plan that comes with it, and send the order.
What you can tag
Anything that moves.
Each kind of asset gets the device that fits it. Most get a tag the size of a coin.
Machines
Excavators, loaders, rollers and lifts.
Gets aStandard tag
Attachments
Buckets, breakers and quick hitches that live outside for years.
Gets aRugged tag
Containers and cabins
Site containers, welfare units and storage boxes.
Gets aStandard tag
Power and pumps
Generators, compressors, pumps and heaters.
Gets aStandard tag
Tools and small kit
Tool cases, lasers, plate compactors and saws.
Gets aMini tag
Trucks and trailers
A gateway on the truck sees every tag that rides along.
Gets aVehicle gateway
Units that travel alone
Light towers and generators that go out to a site on their own.
Gets aLive tracker
How the pieces fit
Tags are heard. Phones and gateways listen.
Start with tags and the phones your staff already carry. Add fixed hardware only where a zone must update itself.
Heard
Tags.
A tag on each asset sends a short signal every few seconds. It has no GPS and needs no charging.
Listens
Phones and gateways.
Staff phones with the Hirro app hear tags as people walk the yard. A gateway listens in one spot, at the gate or on a truck.
Reports on its own
Live trackers.
A live tracker has GPS and its own 4G connection, for units that travel alone.
Every tag heard lands on one map in Hirro, in zones you draw.
The lineup
Five devices.
Tags for what moves, gateways for zones and trucks, live trackers for what leaves.
Standard tag
Most machines and attachments. Swappable battery.
BLE · IP67View details
Rugged tag
Built-in magnet. Up to 8 years.
IP67 · IK09View details
Mini tag
Tools and small equipment.
BLE · smallView detailsLive tracker
GPS over 4G, anywhere.
GNSS · LTE-MView details
Gateway
Gate, wash bay, workshop or truck.
BLE to 4GView details
Fitting
Your own team fits it.
Tags go on with pads, screws or cable ties. Gateways need power and a pole or a dashboard.
Vehicle gateway
Under the dashboard.
Wired to the truck, so it hears every tag that rides along.
Standard tag
A battery you swap.
The CR2477 battery swaps in seconds at the workbench.
Kits
Start from a kit.
Four starting points. Pick one and change it in the configurator below.
Fits Start
Starter kit
One yard, phones only.
- 100 Standard tags
- Mounting set and magnet key
- 10 spare batteries
From stock. Ships within 2 weeks.
Start from this kitFits Operate
Yard kit
A working yard with a gate that updates itself.
- 500 Standard tags
- 50 Rugged tags
- 1 site gateway for the gate
Made to order. Ships in 5 to 6 weeks.
Start from this kitFits Operate
Plant kit
Halls and racks, tools included.
- 500 Standard tags
- 100 Mini tags
- 3 indoor gateways
Made to order. Ships in 5 to 6 weeks.
Start from this kitAny plan
Fleet add-on
For what rides on trucks or travels alone.
- 10 vehicle gateways
- 10 live trackers
- Fitting guide
Made to order. Ships in 5 to 6 weeks.
Start from this kitConfigurator
Build your own kit.
Tell us about your site and what you want to track. You get the hardware list and the Hirro plan that comes with it.
How you pay
You pay for the software, not a markup on tags.
Buy
Close to cost.
Hardware is priced close to what it costs us, so it never blocks a deal. Monthly software billing is open to you.
Lease
Per device, per month.
Over 36 months, with battery swaps and replacements included. We take the tags back to reuse.
Bring your own
Keep your tags.
Hirro reads standard BLE tags (iBeacon and Eddystone) at no hardware cost.
Questions
About the hardware.
Can I buy hardware without the software?
No. The tags only make sense with a Hirro plan, so every order comes with one. The configurator shows which plan fits your asset count and the help you want.
How long does delivery take?
Starter kits are in stock in Belgium and ship within 2 weeks. Other kits and custom orders ship in 5 to 6 weeks. We confirm the date when we confirm the order.
How do I order hardware?
Build your kit in the configurator on this page and send the order. There is no payment online: we confirm the price and delivery by email or phone, then ship.
How long does a tag battery last?
The Standard tag runs up to 3 to 4 years and the Rugged tag up to 8 years. Battery life depends on how often the tag broadcasts. The Standard tag battery is a CR2477 that you can swap in seconds.
Do I need gateways?
Not to start. Staff phones do most of the reading. Gateways make gate, wash bay and workshop stages update on their own, and a gateway on a truck tracks what it carries.
Can I use my own Bluetooth tags?
Yes. Hirro reads standard BLE tags (iBeacon and Eddystone) at no hardware cost. Other protocols need a one-off integration.
Can I lease the hardware?
Yes. Lease per device per month over 36 months, with battery swaps and replacements of failed units included. Leased hardware goes with yearly software billing.
Book a demo
Have it sized for your site.
Send us your asset list or book a walk of your yard. We size the tags and gateways with you.
Or leave your work email and we plan it with you.
We use your email only to plan the demo.
Thanks. We'll email you within one working day to plan the demo.
Your email wasn't sent. Check your connection and try again, or email maarten@hirro.eu.